From: Hill, JA (John) [J.A.Hill@rl.ac.uk]
Sent: 21 April 2006 16:41
To: Olivier Teller; Gilles Favre
Cc: Dave Cockerill
Subject: Manifold Drawings

Attachments: td-1029-777_a.pdf; td-1029-804_a.pdf; td-1029-780_a.pdf; td-1029-776_a.pdf; td-1029-801_a.pdf; td-1029-785_a.pdf; td-1029-784_a.pdf

  Bonjour Olivier,

Please find attached files PDF files of manifold blocks, lids and assemblies.

Dave will confirm this but we would like four manifold blocks (LH) td-1029-776 for our prototype run.

The thickness of the lid will remain at 3mm. The block size is optimised for the assemblies and as you have already pointed out increasing the lid thickness will interfere with the inlet/outlet opening. At the time of obtaining the material from CERN stores, only 6mm was available.

 

Best Regards

John